
Sprockets
Sprockets
VAV supplies sprockets for different types of conveyor chains. For drop forged chains, the range includes body wheels with replaceable tooth segments. In addition, VAV supplies sprockets and return wheels for double drag link chains. Depending on the application, both one-piece and split versions are available.
These components are also known as scraper conveyor sprockets, fork sprockets, toothed wheels, Redler wheels and return wheels. However, the correct design depends on the chain type, pitch and number of teeth.

Sprocket for drop forged chain
A sprocket for a drop forged chain consists of a body wheel with interchangeable tooth segments. As a result, worn segments can be replaced without replacing the complete body wheel.
The table below lists the standard sprockets available from stock. For example, you can compare the chain pitch, number of teeth and corresponding pitch diameter. Other dimensions are available on request.
Therefore, always check the chain pitch and required number of teeth before selecting a sprocket.
| Sprockets for drop forged chain available ex stock (parameters in mm) | ![]() | |||||
| Pitch Ø / number of segments per complete set | ||||||
| Pitch | 6 teeth | 7 teeth | 8 teeth | 9 teeth | 10 teeth | |
| 102 | Ø204,00 / 4 | Ø235,09 / 4 | Ø265,49 / 4 | Ø298,23 / 4 | Ø330,08 | |
| 125 | Ø250,00 / 4 | Ø288,10 / 4 | Ø326,64 / 4 | Ø365,48 / 4 | Ø404,51 | ![]() |
| 142 | Ø284,00 / 4 | Ø327,28 / 4 | Ø371,06 / 8 | Ø415,18 / 6 | Ø459,53 | |
| 150 | Ø300,00 / 6 | Ø345,71 / 4 | Ø391,97 / 8 | Ø438,57 / 4 | Ø485,42 / 10 | |
| 160 | Ø320,00 / 4 | Ø368,76 / 4 | Ø418,10 / 8 | Ø467,81 / 4 | Ø517,78 | |
| 200 | Ø400,00 / 4 | Ø460,95 / 4 | Ø522,62 / 8 | Ø584,76 / 4 | Ø647,22 |
Sprocket for double drag link chain
For double drag link chains, VAV supplies toothed sprockets and smooth return wheels. Their hardened running surfaces improve wear resistance. In addition, these wheels feature symmetrical hubs and a split design, which simplifies assembly and disassembly.
The table below shows the available chain pitches, inner widths, bush diameters and pitch diameters. Furthermore, alternative dimensions are possible on request.
When selecting a sprocket or return wheel, make sure the dimensions match the chain and conveyor construction.
| Sprockets for double drag link chain (measurements in mm) | ||||||
| Pitch | Inner width | Bush-Ø | Pitch-Ø (p x n) | |||
| 6 teeth | 7 teeth | 8 teeth | ||||
| 63 | 22 | 18 | Ø126,00 | - | Ø164,63 | ![]() |
| 80 | 22 | 18 | Ø160,00 | - | Ø209,05 | |
| 100 | 22 | 18 | Ø200,00 | - | Ø261,31 | |
| 125 | 25 / 30 / 35 / 45 | 20 / 26 / 30 | Ø250,00 | - | Ø326,64 | |
| 150 | 30 / 45 | 22 / 30 | - | Ø345,71 | - | |
| 160 | 30 / 45 | 30 | Ø320,00 | - | Ø418,1 |
How to calculate sprocket pitch diameter
The pitch diameter of a sprocket depends on the chain pitch and the number of teeth.
First, determine the number of teeth (Z). Next, find the corresponding conversion factor (N) in the table below. Then multiply the chain pitch by this factor.
Pitch diameter (mm) = Chain pitch (mm) × N
For example, a chain with a pitch of 142 mm and a sprocket with six teeth has a conversion factor of 2. Therefore, the calculated pitch diameter is 284 mm.
| Pitchdiameter calculate. Z= number of teeth, n= conversion factor | |||||||||
| Pitchdiamter (in mm) = Pitch of the chain x N | |||||||||
| Z | N | Z | N | Z | N | Z | N | Z | N |
| 6 | 2 | 9 | 2.9238 | 12 | 3.8637 | 15 | 4.8097 | 18 | 5.7588 |
| 7 | 2.3048 | 10 | 3.2361 | 13 | 4.1786 | 16 | 5.1258 | 19 | 6.0755 |
| 8 | 2.6131 | 11 | 3.5495 | 14 | 4.494 | 17 | 5.4422 | 20 | 6.3925 |








