(super) Starco Elevator Buckets

download pdf

Calculations

faq

Starco and Super Starco elevator buckets made of pressed steel (or stainless steel) and plastic (PE, Nylon) are suitable for transporting various products at a high belt speed.

The low rear height and the relatively large projection guarantee that the Starco bucket easily ejects its product even at high belt speeds. This makes it possible to attain a higher capacity.

In the table below you will find the dimensions with corresponding contents (Z3 = water filling) and the maximum number of elevator buckets per meter.

This product is also commonly referred to as or can be compared to: Claus, System C, Jet, EuroJet or high capacity bucket.

Starco Steel

Starco elevator buckets made of pressed steel (S235JRG2 or stainless steel) are suitable for transporting various products. Due to the relatively low rear height (h1) of the buckets, a large number of buckets can be placed per meter. These buckets can also be produced in a welded version and be equipped with a front edge or 3-sided edge reinforcement.

The low rear height and relatively large discharge ensure that the Starco bucket easily ejects its product even at a high belt speed. This allows a high capacity to be achieved.


Starco elevator buckets made of steel/stainless steel (parameters in mm)
Type	Size/weight						Volume		Holes			Max
	b	a	h1	h2	t	Kg	Z2	Z3	d	e	Nr	Buckets/m
S100	160	89	62	36	0.9	0.12	0.29	0.19	8.5	50	2	15
S120	126	100	72	49	0.9	0.21	2.55	0.4	8.5	67	2	13
S130	136	114	78	51	1.5	0.35	0.61	0.41	8.5	70	2	12
S140	145	115	86	49	1.5	0.37	0.85	0.65	9	86	2	11
S160	165	125	90	59	1.5	0.5	1.15	0.85	8.5	101	2	10.5
S180	185	140	92	56	1.5	0.53	1.29	0.9	8.5	100	2	10.5
S200	205	140	100	67	1.5	0.71	1.75	1.25	11	131	2	9.5
S230	238	165	108	68	2	1.01	2.25	1.65	11	120	2	9
S250	255	151	107	70	2	1.14	2.6	1.95	11	77	3	9
S280	289	165	108	68	2	1.32	2.91	2.08	11	80	3	9
S300 x 180	308	190	117	68	2	1.43	3.66	2.46	11	100	3	8.13
S300 x 215	310	217	140	86	2	2.05	5.5	4	11	100	3	7.14
S330	340	214	130	81	2	2.09	5.51	3.92	11	120	3	7.14
S350	360	188	134	87	2	2.25	5.75	4.05	11	90	4	7.14
S370	381	214	130	82	2	2.38	6.18	5.1	11	90	4	7.14
S400	410	198	142	93	2	2.58	7	5	13	100	4	7
S450	464	214	130	82	2.5	3.4	8	5.59	11	90	5	7.14
S500	512	223	160	104	2.5	3.78	11	8	13	100	5	6

Z2 = gross volume in liters, Z3 = net volume in liters.
Starco elevator buckets are also available in thicknesses (t) of 2.5 and 3.0 mm.

Special designs with differing hole spacing are possible in some cases.

plastic starco Buckets

VAV supplies plastic Starco elevator buckets made of PEHD and nylon ex stock. Besides, PU and zytel are also available. Plastic elevator buckets lend themselves particularly well to the transport of wet, sticky or fatty products. Another advantage is that plastic elevator buckets do not strike a spark even if the belt is misaligned.

Another advantage is that plastic elevator buckets do not spark when running out of pouly, even if the belt is not properly aligned. PEHD is temperature resistant up to 70 degrees Celsius and nylon elevator buckets are temperature resistant up to 90 degrees Celsius.


Starco elevator buckets made of plastic (parameters in mm)
Type	Size/weight						Volume		Holes			Max
	b	a	h1	h2	t	Kg	Z2	Z3	d	e	Nr	Buckets/m
S100 x 90 HDP	109	90	62	39	4	0.06	0.35	0.23	8.5	50	2	14.28
S130 x 120 HDP	140	121	81	54	4.7	0.13	0.7	0.5	8.5	70	2	11.11
S150 x 110 HDP	159	113	78	51	5.2	0.17	0.72	0.49	9	89	2	12
S180 x 140 HDP	190	146	94	56	6	0.22	1.25	0.9	9	100	2	10.5
S225 x 140 HDP	235	140	94	60	6	0.34	1.67	1.16	9	120	2	10.5
S230 x 170 HDP	240	173	110	70	6	0.43	2.32	1.75	11	120	2	9
S280 x 170 HDP	290	173	113	72	6	0.5	3	2.28	11	80	3	9
S300 x 180 HDP	314	181	124	81	6	0.58	3.8	2.7	9	100	3	8.13
S330 x 215 HDP	342	220	141	92	8.5	0.93	5.9	4.51	11	120	3	7.14
S350 x 180 HDP	367	181	124	85	7	0.79	4.5	3.3	9	90	4	8.13
S370 x 215 HDP	380	218	141	90	9	1.07	6.3	4.6	11	90	4	7.14

Z2 = gross volume in liters, Z3 = net volume in liters.

Super starco steel

The Super Starco buckets are deeper than the ‘regular’ Starco buckets, although they are equally suitable for elevators with higher belt speeds. This elevator bucket lends itself particularly well to light-weight and/or wet materials. Steel and plastic Super Starco are available from stock. VAV supplies the Super Claus in PEHD en nylon. Besides materials as PU and zytel are also available.

This product is also commonly referred to as or can be compared to: SPS, SuperClaus, System CC, JETor high capacity bucket.


Super Starco elevator buckets in mild steel / stainless steel (parameters in mm)
Type	Size/weight						Volume (L)		Holes			Max
	b	a	h1	h2	t	Kg	Z2	Z3	d	e	Nr	Buckets/m
SPS80 x 80	85	80	58	39	1	0.11	0.21	0.18	8	43	2	15
SPS100 x 90	106	89	66	45	1	0.12	0.33	0.25	8.5	50	2	14
SPS100 x 100	105	97	78	46	1	0.18	0.42	0.29	8.5	50	2	12
SPS120 x 100	125	105	77	53	1	0.22	0.58	0.44	8	67	2	12
SPS130 x 120	138	120	90	62	1.2	0.3	0.83	0.65	8.5	70	2	10.5
SPS140 x 110	146	112	91	40	1.5	0.43	0.76	0.41	8.5	70	2	10.5
SPS140 x 120	146	120	90	62	1.5	0.4	0.87	0.65	8.5	70	2	10.5
SPS160 x 125	166	125	112	78	1.5	0.55	1.44	1.2	8.5	100	2	8.6
SPS180 x 140	187	147	112	78	1.5	0.61	1.75	1.35	8.5	100	2	8.6
SPS200 x 150	205	150	112	77	1.5	0.77	2	1.53	9	100	2	8.6
SPS200 x 180	204	182	140	98	2	1.28	2.84	2.17	11	110	2	7
SPS230 x 160B	233	160	122	85	1.5	0.86	2.72	2.05	10.5	120	2	8
SPS230 x 170	235	170	132	93	2	1.4	3.09	2.4	11	120	2	7
SPS240 x 160C	247	165	130	92	2	1.35	3.03	2.37	10.5	120	2	7.4
SPS250 x 215	257	215	162	113	2	1.86	5.3	4.1	11	85	3	5.88
SPS260 x 165	262	165	130	92	2	1.38	3.28	2.55	10.5	77	3	7.4
SPS260 x 180	270	188	140	96	2	2	4.1	3.2	11	80	3	7
SPS280 x 165	289	167	132	93	2	1.55	3.78	2.95	10.5	80	3	7.4
SPS280 x 180	290	185	140	97	2	1.7	4.4	3.3	11	80	3	7
SPS280 x 215	294	215	163	114	2	2.18	6.04	4.7	11	80	3	5.88
SPS300 x 165B	308	165	135	94	2	1.65	3.88	2.9	11	100	3	7.2
SPS300 x 180B	308	182	140	95	2	1.8	4.5	3.5	11	100	3	7
SPS300 x 215	310	220	163	112	2	2.32	6.7	5.2	11	100	3	5.88
SPS330 x 165	340	165	135	97	2	1.9	4.4	3.5	11	120	3	7.2
SPS330 x 180	340	182	140	98	2	2	5.2	4	11	120	3	7
SPS330 x 215	340	215	163	112	2.5	2.97	7.2	5.65	11	120	3	5.88
SPS350 x 165B	360	165	135	94	2	2.12	4.5	3.65	11	120	3	7.2
SPS350 x 180	362	182	140	98	2	2.1	5.4	4.2	11	120	3	7
SPS350 x 215	362	215	163	112	2.5	3.23	7.6	5.86	11	120	3	5.88
SPS370 x 180	385	195	140	95	2.5	2.8	6.4	4.9	11	90	4	7
SPS370 x 215	381	215	163	112	2.5	3.32	8.1	6.3	11	90	4	5.88
SPS440 x 215	450	225	165	113	2.5	3.92	9.83	7.44	11	110	4	5.88
SPS450 x 215	464	215	163	113	2.5	4	9.95	7.9	11	90	5	5.88
SPS470 x 215	480	225	165	113	2.5	4.14	10.56	8.06	11	120	4	5.88
SPS500 x 215	515	215	163	113	2.5	4.28	11.25	8.8	11	100	5	5.88

Z2 = gross volume in liters, Z3 = net volume in liters

Super starco plastic


Super Starco elevatorbuckets made of plastic PEHD/Nylon (parameters in mm)
Type	Size					Kg		Volume (L)		Holes			Max
	b	a	h1	h2	t	HDPE	Nylon	Z2	Z3	d	e	Nr	Buckets/m
SPS80 x 80	90	85	63	43	4	0.08	0.09	0.24	0.18	9	43	2	15
SPS100 x 90	110	100	67	44	5	0.11	0.13	0.38	0.29	9	50	2	14
SPS120 x 100	129	110	80	55	5	0.15	0.18	0.59	0.46	9	67	2	12
SPS130 x 120	135	120	85	57	5	0.19	0.23	0.7	0.54	9	70	2	11
SPS130 x 130	146	130	90	60	5	0.21	0.25	0.87	0.65	9	70	2	10.8
SPS140 x 120	145	120	90	62	5	0.18	0.22	0.8	0.61	8.5	70	2	10.8
SPS160 x 140	172	152	113	78	6	0.34	0.4	1.58	1.22	9	100	2	8.6
SPS180 x 140	187	150	112	77	6	0.3	0.36	1.75	1.35	9	100	2	8.6
SPS200 x 150	205	150	112	75	6	0.35	0.42	1.82	1.39	9	100	2	8.6
SPS200 x 160	210	158	115	79	7	0.39	0.46	2.09	1.61	9	100	2	8.5
SPS230 x 170	240	175	138	93	7	0.61	0.73	3.06	2.4	11	120	2	7
SPS240 x 165	250	170	132	93	7	0.54	0.64	3.1	2.4	11	120	2	7.4
SPS280 x 165	293	170	132	95	7	0.67	0.79	3.75	3	11	80	3	7.4
SPS280 x 170	282	175	138	97	7	0.67	0.8	3.76	2.96	11	80	3	7
SPS280 x 180	290	185	140	97	7	0.84	1	4.2	3.3	11	80	3	7
SPS300 x 150	305	152	115	80	7	0.65	0.77	2.89	2.24	9	102	3	8.5
SPS300 x 180	316	185	140	97	8	0.85	1.01	4.6	3.6	11	100	3	7
SPS300 x 215	318	220	168	117	9	1.18	1.4	6.6	5.2	11	100	3	5.88
SPS330 x 180	347	185	140	97	8	0.9	1.07	5	4	11	120	3	7
SPS330 x 215	343	220	168	117	9	1.3	1.55	7.1	5.73	11	120	3	5.88
SPS350 x 180	367	186	140	97	9	1.12	1.33	5.25	4.1	11	120	3	7
SPS350 x 215	368	220	168	117	9	1.38	1.64	7.75	6.12	11	120	3	5.88
SPS370 x 215	390	220	168	117	9	1.45	1.72	8.15	6.42	11	90	4	5.88
SPS400 x 215	420	220	168	117	9	1.54	1.83	8.8	7	11	100	4	5.88
SPS450 x 215	470	220	165	115	9	1.56	2.06	9.7	7.7	11	90	5	5.88
SPS500 x 215	525	220	168	117	9	1.84	2.19	11.25	9	11	100	5	5.88